A practical wall notebook

Scale & hanging

Ochre Folded Plane Wall Panel with three bent aluminum planes

Begin with the whole object.

Measure a clear area in inches. Make a paper outline of the sheet or panel, position it with removable tape suitable for your wall, and view it from where you normally sit or stand. The photograph is not a size reference, and a furnished-room effect is not a measurement.

  1. Record clear width, height and any door or switch clearance.
  2. Mark the outside dimensions, including a print’s border.
  3. For panels, check depth and weight as well as front area.
  4. Confirm the wall construction before selecting separate fixings.

Sheet size is not image area.

Ochre Arc uses a 12 × 16 in overall sheet. A standard 0.5 in border leaves an 11 × 15 in image area; a 1 in wide border leaves 10 × 14 in. Both fit inside the same overall sheet. Our diagram illustrates that principle, not the proportions of every artwork.

Blue Channel is 16 × 20 in; Charcoal Interval 11 × 14 in; Clay Contour 18 × 24 in; Moss Grid 12 × 18 in. Choose your own frame and mat after checking their actual openings. Frames are never included.

Compare paper sizes →
Image area
12 × 16 in overall sheet
Standard: 0.5 in border / Wide: 1 in border
Diagram schematic, not to scale. Frame not included.

Depth changes the hanging task.

The Stepped Relief is 16 × 16 × 1.5 in and 3 lb, with rear keyhole slots. Circular Ridge is 20 in diameter × 1.25 in deep and 4 lb, with a rear keyhole. Offset Block is 18 × 24 × 1.75 in and 6 lb, with two rear D-rings. These are different loads and contact points, not interchangeable hardware instructions.

Woven Texture has two rear D-rings on a 12 × 20 × 1 in, 2 lb construction. Folded Plane uses two mounting slots on a 14 × 18 × 2 in, 2.5 lb aluminum panel. Screws, anchors and installation are not supplied. Choose suitable fixings for your wall and the stated weight; consult a qualified installer if needed.

Inspect the panel constructions →

Handle, position, check.

Support a relief by its backing, not a projecting layer or loose cord. Check mounting points before hanging. Keep objects indoors away from moisture, steam and prolonged direct sunlight. Dust gently with a dry soft cloth. Do not soak paper, cotton or wood-based panels.

Leave practical clearance around an object and check stability before placing furniture beneath it. Decorative panels are not structural materials, wet-room finishes or acoustic products. If something arrives damaged, do not mount it; contact us with the reference to arrange the appropriate remedy.

Ask about a specification →

Essential session storage is always active for cart and form security. Optional analytics and marketing services are not installed.

A saved choice lasts up to 180 days. Opening this panel does not record a decision.